Product brief introduction
This product is solvent by a variety of aliphatic hydrocarbons, alcohols with the cleaning agent prepared, not containing carbon tetrachloride, ethyl chloride, trichloroethylene, three CFC-113 class ODS controlled substances, is a substitute of ODS cleaning agent ideal.
●No corrosion to copper, steel, aluminum, gold, silver, titanium and other metal materials, has excellent compatibility for most synthetic rubber, plastic and other organic materials.
●volatile, non-toxic, strong dissolving capacity, with oil, degreasing ability in addition to excellent, and flux cleaning after welding residue PCB plate.
●alternative three ethyl chloride, trichloroethylene, carbon tetrachloride, CFC-113 ODS cleaning agent.
●no harm to human body, safe for the environment.
●Widely used in aviation, aerospace, computer, electronics, communications equipment, precision instruments and machinery processing industry of electronic components, PCB plate, optical devices, precision cleaning metal parts in the production process.
●for microelectronics, oil, degreasing process instrumentation of, also can be used for cleaning welding flux, the PCB residual LCD residues, and precision metal parts.
Method of use
●According to the dirt residues, composition, cleanliness, cleaning process requirements such as online experiment to determine the process parameters:
A. cleaning temperature: recommendations for cleaning at room temperature.
B. cleaning time: adjustment in 0.5-5 min.
●According to user requirements, determine the cleaning method, reasonable field test process, safety operation procedures, quality control procedures, cleaning agent replacement cycle.
●manual brushing : can be used for soaking, washing, if higher cleanliness requirements, ES-334 can be used for washing ( cleaning agent after rinsing the recyclable ), then blow dry or dry naturally, into the next process.
●ultrasonic cleaning: according to the process conditions were determined, using ultrasonic cleaning. Then dry or dry naturally, into the next procedure.
Matters needing attention
●The first cleaning of the part is not solvent components that after welding.
●the use of the environment should be well ventilated, must keep away from fire.
●avoid long time contact with the skin or inhaled volatile gases. Such as accidentally splashed into the eyes, please rinse with water.
●sealed storage in a cool, ventilated place, do not contact with the high temperature heat source, avoid sun exposure.
●for heating, must take safety protection measures.
200L/ barrel，20L/ barrel;