Product brief introduction
ES-518 aluminum cleaning agent is composed of high-grade raw materials composed of an environment-friendly water-based cleaning agent, cleaning for die-casting aluminum surface grinding paste, dust, oil, has no corrosion, washing, in addition to multiple effects of oil, dust, and does not damage the substrate characteristics.
●Economy : belong to concentrated products, low concentration dilution, the average low cleaning cost.
●efficiency: degreasing and cleaning effect is good, fast speed, can quickly be oil stripping. And can remove the oxide layer on the surface of gray aluminum, aluminum light recovery.
●security: safe and harmless to human body.
Applicable to all walks of life such as: cleaning the auto parts industry, electronic industry, motor die-casting aluminum surface grinding paste, dust, grease.
Method of use
●Ultrasonic cleaning: will ES-518 have been identified by the ratio the ratio of 5%-10% diluted with water adding ultrasonic cleaning machine, temperature: adjusted between 50℃ -60 ℃. The cleaning time: adjustment in 0.5min-15min. Rinse with water after cleaning. After rinsing according process requirements to the follow-up process.
●soak cleaning: customers can choose according to need cleaning agent concentration, temperature 25 ℃ --60 ℃. Cleaning time 3--5min. Can also be based on the amount of oil, improve concentration and prolong the period of cleaning.
●when the cleaning effect of variation, timely replenishment solution.
●when the solution appears at the bottom of a black residue or use more than 15 days, is proposed to replace the bath.
Matters needing attention
●Avoid long time in contact with the skin, such as splashing into eyes, rinse immediately with plenty of water.
●avoid freezing, the goods storage temperature or below the freezing point, may precipitate or thickening, but no influence on the performance of product, before use can be heated to room temperature and stirring.
●this product is only suitable for the concentration of 5%-10% below 65 ℃ and cleaning, concentration is too high or too high temperature may lead to aluminum color phenomenon.
25KG/ barrel; 200KG/ barrel